All brands and sizes of replacement speakers, celestion to peavey. Making sure you use the right type of speaker is very important when replacing guitar and pa system speakers. Make sure the cabinet is designed to handle what you wish to replace the speaker with. using to low of a wattage speaker can be damaged easily while using to big a wattage you might be under powering the cabinet and not getting the full tone out of your system. Don't be afraid to ask alot of questions when you go to buy replacement speakers. Buy them right the first time and get great sound for years to come.

Celestion-alnico-gold speaker: Many other manufacturers have tried to recreate the Celestion Blue sound in a higher powered driver, and some have come close. But only Celestion has the experience and know-how to emulate the tone and response of its own Alnico classic in a modern driver that's perfect for single or multiple applications in cabinets or combos. The power handling of the Original Blue speaker was limited by the material used in the construction of the voice coil. After hundreds of hours of testing and countless prototypes, Celestion has developed a coil that can withstand higher levels of power but leaves the tone unaffected. Such a relatively simple, yet important, development lies at the heart of a truly remarkable new guitar loudspeaker. Celestion Alnico Gold Guitar Speaker - Scratch 'n' Dent Specifications: Nominal diameter: 12", 305mm Power Rating: 50W Nominal impedance: 8 and 15 Sensitivity: 100dB Chassis type: Pressed steel Voice coil diameter: 1.75", 44.5mm Voice coil material: Round copper Magnet type: Alnico Frequency range: 75-5000Hz Resonance frequency, Fs: 75Hz DC resistance, Re: 6.4 & 11.8 Diameter: 12.2", 309mm Overall depth: 6.5", 165mm Magnet structure diameter: 5.0", 128mm Cut-out diameter: 11.1", 283mm Mounting slot dimensions: 0.31", 7.9mm ? Number of mounting slots: 4 Mounting slot PCD: 11.7", 297mm Unit weight: 9.3lb, 4.2kg

Celestion-alnnico-blue speaker: The Celestion Blue Alnico 15W 12" Speaker was originally designed in the '50s and used in early Vox and Marshall amplifiers. Uses an Alnico magnet. Known for its exceptional tonal definition and dynamic audio range. Best suited for low-power Class A tube amplifiers. Handles 15W. Celestion Alnico Blue 15W 12" Speaker Features: Designed in the '50s Used in early Vox and Marshall amps Uses an Alnico magnet Best suited for low-power Class A tube amps Handles 15W

Celestion-century-g12 speaker: The Celestion G12H is a reissue of their 12" guitar speaker that was re-released in 1994 for the Celestion 70th anniversary. Loud and proud thanks to its heavy magnet structure, the G12H provides a fusion of the Vintage 30 and the Greenback speaker characteristics, producing a thick, warm and syrupy sound while still retaining a tight and focused bottom end. When played clean the G12H remains clear and musical without ever sounding harsh. In overdrive, pick attack is vividly articulated with sustained notes trailing off into warm harmonic tones. Celestion G12H 30 Watt Anniversary Vintage Guitar Speaker Specifications: Nominal diameter: 12", 305mm Power Rating: 30W Nominal impedance: 8 ohms Sensitivity: 100dB Chassis type: Pressed steel Voice coil diameter: 1.75", 44.5mm Voice coil material: Rounded copper Magnet type: Ceramic Magnet weight: 50oz, 1.42kg Frequency range: 75-5000Hz Resonance frequency, Fs: 85Hz DC resistance, Re: 6.7 ohms & 13.1 ohms Mounting Information Diameter: 12.2", 309mm Overall depth: 5.3", 135mm Magnet structure diameter: 6.1", 156mm Cut-out diameter: 11.1", 283mm Mounting slot dimensions: 0.31", 7.9mm ø Number of mounting slots: 4 Mounting slot PCD: 11.7", 297mm Unit weight: 10.4lb, 4.7kg Celestion G12H 30 Watt Anniversary Vintage Guitar Speaker Features: 12" guitar speaker Fusion of Vintage 30 and Greenback 50 oz. ceramic magnet 1.75" copper voice coil 75-5000Hz frequency response

Celestion-evh speaker: These G12 replacement speakers drive the EVH 5150III amplifier to deliver ultimate Van Halen tone. They're the result of Edward Van Halen and Fender joining forces in an incredible collaboration. Throughout his career, Eddie Van Halen has sought out original Celestion 20-watt Greenback speakers to load into his recording and performing rigs. So, when designing the EVH 5150III it was to Celestion that EVH and Fender turned in search of that vintage Greenback sound. Celestion's Heritage Series G12 M speakers are a faithful reproduction of the original 1960s 20-watt Greenback and for EVH they provide the ideal solution. However—in order to give this speaker a look that is unmistakably EVH—a specially designed label, featuring the Van Halen logo and unique EVH striped design, along with a black-painted can that evokes the memory of the rare and much sought after Celestion "Blackback" speakers, were added. Celestion Eddie Van Halen G12EVH Replacement Speaker Specifications: Nominal diameter: 12", 305mm Power Rating: 20W Nominal impedance: 8 ohms, 15 ohms Sensitivity: 96dB Chassis type: Pressed steel Voice coil diameter: 1.75" (44.5mm) Voice coil material: Rounded copper Magnet type: Ceramic Magnet weight: 35 oz. (0.99 kg) Frequency range: 75-5000Hz Resonance frequency, Fs: 75Hz DC resistance, Re: 6.57 ohms, 12.3. ohms Diameter: 12.2" (309mm) Overall depth: 5.1" (130mm) Magnet structure diameter: 5.9" (150mm) Cut-out diameter: 11.1" (283mm) Mounting slot dimensions: 0.31", (7.9mm) diameter Number of mounting slots: 4 Mounting slot PCD: 11.7" (297mm) Unit weight: 7.9 lbs. (3.6 kg)

celestion-g10 speaker : This 10" 60W ceramic magnet speaker has been voiced to produce the unmistakable Celestion vintage tones. Pushed hard it has plenty of growl and performs with very solid bass, muscular mids, and an extremely articulate top end. In addition, the G10 Vintage employs a 1.75" round copper voice coil, has a frequency range of 100-5500Hz, and sensitivity of 97dB (1W @ 1m). Golden sand finish. The G10 Vintage is the natural evolution of the well-respected Vintage 10. Closer to the sound of the Vintage 30 than its predecessor, the G10 Vintage still maintains a distinctive tonal flavor of its own. All of these speakers use the same voice coil designs and similar ceramic magnet structures to achieve their familiar, hard-rocking Celestion sound. Celestion G10 Vintage Guitar Speaker Specifications: Nominal diameter: 10", 254mm Power Rating: 60W Sensitivity: 97dB Chassis type: Pressed steel Voice coil diameter: 1.75", 44.5mm Voice coil material: Round copper Magnet type: Ceramic Magnet weight: 31 oz., 0.88kg Frequency range: 100-5500Hz Resonance frequency, Fs: 115Hz DC resistance, Re: 7.47 ohms Mounting Information Diameter: 10.1", 256mm Overall depth: 4.1", 104mm Magnet structure diameter: 5.3", 134mm Cut-out diameter: 9.0", 229mm Mounting slot dimensions: 0.2 x 0.3", 6 x 8mm Number of mounting slots: 4 Mounting slot PCD: 9.6", 245mm Unit weight: 5.3 lbs., 2.4kg Celestion G10 Vintage Guitar Speaker Features: 10" 60W ceramic magnet speaker 1.75" round copper voice coil Frequency range of 100-5500Hz Sensitivity of 97dB (1W @ 1m) Golden sand finish

Celestion-g12h-heritage speaker : The Celestion G12H is a reissue of their 12" guitar speaker that was re-released in 1994 for the Celestion 70th anniversary. Loud and proud thanks to its heavy magnet structure, the G12H provides a fusion of the Vintage 30 and the Greenback speaker characteristics, producing a thick, warm and syrupy sound while still retaining a tight and focused bottom end. When played clean the G12H remains clear and musical without ever sounding harsh. In overdrive, pick attack is vividly articulated with sustained notes trailing off into warm harmonic tones. Celestion G12H 30 Watt Anniversary Vintage Guitar Speaker Specifications: Nominal diameter: 12", 305mm Power Rating: 30W Nominal impedance: 8 ohms Sensitivity: 100dB Chassis type: Pressed steel Voice coil diameter: 1.75", 44.5mm Voice coil material: Rounded copper Magnet type: Ceramic Magnet weight: 50oz, 1.42kg Frequency range: 75-5000Hz Resonance frequency, Fs: 85Hz DC resistance, Re: 6.7 ohms & 13.1 ohms Mounting Information Diameter: 12.2", 309mm Overall depth: 5.3", 135mm Magnet structure diameter: 6.1", 156mm Cut-out diameter: 11.1", 283mm Mounting slot dimensions: 0.31", 7.9mm ø Number of mounting slots: 4 Mounting slot PCD: 11.7", 297mm Unit weight: 10.4lb, 4.7kg Celestion G12H 30 Watt Anniversary Vintage Guitar Speaker Features: 12" guitar speaker Fusion of Vintage 30 and Greenback 50 oz. ceramic magnet 1.75" copper voice coil 75-5000Hz frequency response

Celestion-g12k-100 speaker: The G12K-100 is Celestion's premium 100W driver featuring the heaviest G12 magnet currently in use. It combines substantial power handling with exceptional sensitivity, detail, and clarity. Its frequency response is awesome, and the Celestion K-100 has, without doubt, the biggest bottom of any G12. It's the king speaker for metal and down-tuners will especially love its aggressive grind. 8 ohms. Celestion G12K-100 Guitar Speaker Specifications: General specifications Nominal diameter 12", 305mm Power Rating 100W Nominal impedance 8 Sensitivity 99dB Chassis type Pressed steel Voice coil diameter 1.75", 44.5mm Voice coil material Round copper Magnet type Ceramic Magnet weight 50oz, 1.42kg Frequency range 80-5500Hz Resonance frequency, Fs 85Hz DC resistance, Re 7 Mounting Information Diameter 12.2", 309mm Overall depth 5.3", 135mm Magnet structure diameter 6.1", 156mm Cut-out diameter 11.1", 283mm Mounting slot dimensions 0.31", 7.9mm ? Number of mounting slots 4 Mounting slot PCD 11.7", 297mm Unit weight 10.4lb, 4.7kg Celestion G12K-100 Guitar Speaker Features: Frequency response is awesome: the K-100 has, without doubt, the biggest bottom end of any G12. The undisputed king of metal, down-tuners in particular will love this speaker's aggressive grind.

Celestion-g12t-hot-100 speakers: With a massive 100W power rating, this speaker works perfectly in high-power or hybrid amplifiers. Celestion G12T 'Hot 100' Guitar Speaker Specifications: Nominal diameter: 12", 305mm Power rating: 100W Sensitivity: 97dB Chassis type: Pressed steel Voice coil diameter: 2", 50.8mm Voice coil material: Round copper Magnet type: Ceramic Magnet weight: 35oz, 0.99kg Frequency range: 80-5000Hz Resonance frequency, Fs: 86Hz DC resistance, Re: 3.56 ohms Mounting Information: Diameter: 12.2", 309mm Overall depth: 4.9", 124mm Magnet structure diameter: 5.8", 148mm Cut-out diameter: 11.1", 283mm Mounting slot dimensions: 0.31", 7.9mm Number of mounting slots: 4 Mounting slot PCD: 11.7", 297mm Unit weight: 7.1 lbs., 3.2kg

Celestion rocket 50 speakers: Look inside the back of a standard 4x12 and you may well find Rocket 50s bolted inside. Celestion Rocket 50 12" Guitar Speaker Specifications: Nominal diameter: 12", 305mm Power rating: 50W Nominal impedance: 8 ohm Sensitivity: 95dB Chassis type: Pressed steel Voice coil diameter: 1.5", 38.1mm Voice coil material: Round copper Magnet type: Ceramic Magnet weight: 17oz, 0.48kg Frequency range: 85-5000Hz Resonance frequency, Fs: 90Hz DC resistance, Re: 6.74 ohms Mounting Information Diameter: 12.2", 309mm Overall depth: 4.8", 122mm Magnet structure diameter: 3.9", 100mm Cut-out diameter: 11.1", 283mm Mounting slot dimensions: 0.31", 7.9mm Number of mounting slots: 4 Mounting slot PCD: 11.7", 297mm Weight: 4.4 lbs., 2.0kg

Celestion-seventy-80 speakers: The Seventy 80 is one of Celestion's most popular speakers. It is an adaptation of the Classic Lead, offering a pleasing lift in the upper frequency spectrum, solid bass, and plenty of midrange. 80W power rating.

Celestion-tube-10 speakers: Designed to deliver maximum response and classic tone, this is an impressive speaker. Celestion Tube 10 Guitar Speaker Specifications: Nominal diameter: 10", 254mm Power rating: 30W Sensitivity: 96dB Chassis type: Pressed steel Voice coil diameter: 1.5", 38.1mm Voice coil material: Round copper Magnet type: Ceramic Magnet weight: 17oz, 0.48kg Frequency range: 85-5000Hz Resonance frequency, Fs: 83Hz DC resistance, Re: 5.83 ohms Mounting Information Diameter: 10.1", 256mm Overall depth: 3.9", 99mm Magnet structure diameter: 3.9", 100mm Cut-out diameter: 9.3", 235mm Mounting slot dimensions: 0.20 x 31", 5 x 8mm Number of mounting slots: 4 Mounting slot PCD: 9.6", 245mm Unit weight: 3.3 lbs., 1.5kg